低速冲击下高强钢绞线网-高性能砂浆加固钢筋混凝土梁试验研究     

张伟  ;廖维张  ;田志敏 《地震学刊》2014,(3):359-364

研究了高强钢绞线网-高性能砂浆加固钢筋混凝土梁的抗低速冲击性能,利用落锤冲击试验法对4根简支钢筋混凝土梁进行对比试验研究,其中1根为普通梁,3根为加固梁,通过分析加固前后梁的破坏形态,结合挠度变化、钢筋的应变以及加速度的时程曲线,对比得到了钢筋混凝土梁加固后的抗冲击性能。研究结果表明：加固后钢筋混凝土梁的抗冲击能力显著提高,钢绞线和砂浆作为外加层,不仅增加了梁的抗弯剪能力和刚度,提高了结构的耗能能力,而且限制了裂缝的发展,使梁的整体性和延性更好;在相同冲击作用下,钢绞线直径的增加能适当提高结构的抗冲击性能。  相似文献   

现浇X形混凝土桩竖向承载性状模型试验研究   总被引：1，自引：0，他引：1  

张敏霞  刘汉龙  丁选明  王智强 《岩土力学》2012,33(2):389-394

为研究现浇X形混凝土桩的荷载沉降特性及其荷载传递机制,利用河海大学的大型试验模型槽开展X形桩的足尺模型静载荷试验。通过在桩身设置的钢筋测力计及在桩底埋设的土压力盒,实测了在竖向荷载作用下X形桩与土相互作用时的工作性状。试验结果表明：X形桩的荷载沉降曲线为缓变型;桩侧摩阻力与桩端阻力随桩顶沉降的增加均呈递增性;但随着桩顶荷载的增加,桩侧摩阻力分担桩顶荷载比例却呈递减性,其分担桩顶荷载比例由初期的约90%下降到极限状态时的70%左右,而桩端阻力分担桩顶荷载的比例呈递增性,其分担桩顶荷载比例由初期的约10%上升到极限状态时30%左右。研究成果可为今后竖向受荷X形桩的设计与研究提供重要参考。  相似文献   

基于自平衡试桩法大直径嵌岩桩尺寸效应分析   总被引：2，自引：0，他引：2  

龚成中  何春林  龚维明  戴国亮 《岩土力学》2012,33(8):2403-2407

基于自平衡测试技术,通过现场的原位测试方法,对大直径嵌岩桩的尺寸效应进行了研究,内容包括桩径尺寸和嵌岩深度变化以及桩端阻力尺寸效应的影响分析等。从测试结果来看,嵌岩桩也存在一定程度的尺寸效应现象。当其他条件一定时,随着桩径的增大,桩侧阻力存在着减小现象;在同一种岩层的情况下,随着嵌岩深度的增大,桩侧阻力发挥也并不相同,嵌岩深度越大,桩侧阻力发挥也越小。实测结果表明,桩周岩石的特性变化对桩侧阻力影响最大,岩石抗压强度越高,桩侧阻力也越大。此外,桩径的变化对桩端阻力的影响更为明显。因此,在大直径嵌岩桩的设计中应注意尺寸效应对桩基承载力的影响。  相似文献   

裂隙岩体渗流-应力耦合等效渗流阻模型   总被引：2，自引：0，他引：2  

陶煜  刘卫群 《岩土力学》2012,33(7):2041-2047

针对含区域主干裂隙岩体在应力作用下的渗透特性进行了研究。运用单裂隙平行板渗流理论、弹性力学方法,结合模拟电路知识,提出等效渗流阻的概念。在分析裂隙岩体区域中主干裂隙系统几何构造的基础上,建立了基于等效渗流阻的- 渗流-应力耦合模型,得到了裂隙岩体等效渗流阻、渗透率与应力之间的关系,从而为研究含区域主干裂隙岩体的应力-渗流耦合规律提供了方便。结合一个基于等效渗流阻模型的算例,考察了含“人”字形组合裂隙试样的渗透特性。经进一步细化后,该模型可用于分析地应力作用下的含区域主干裂隙岩体渗流演化规律。  相似文献   

混凝土重力坝双滑面抗力方向角的取值研究     

郭明伟  王水林  邓琴  李纲林 《岩土力学》2012,33(6):1864-1868

在《混凝土重力坝设计规范》(SL319-2005)中标准双滑面的稳定性程度推荐采用等K法进行计算,但对于抗力方向角的选取并没有统一的标准,研究表明,该方法中抗力角的选取对计算结果比较敏感。为了得到合理的抗力方向角,采用Sarma法、有限元法及刚体极限平衡法中的无条分法对抗力角的选取进行了深入的探讨,并给出了抗力方向角的选取建议。最后通过具体混凝土重力坝工程实例,依据抗力角的选取建议对其沿缓倾角软弱结构面的抗滑稳定问题进行分析,并给出了其最危险滑移面。  相似文献   

水平荷载下导管架平台桩基础的非线性有限元分析   总被引：2，自引：0，他引：2  

袁志林  段梦兰  陈祥余  钟超  王建国 《岩土力学》2012,33(8):2551-2560

导管架平台桩基础的控制荷载主要为风荷载、波浪荷载、地震荷载等水平荷载,为研究水平荷载下导管架平台桩基础的承载特性,采用非线性有限元分析方法对水平荷载下桩-土之间的相互作用进行研究,提出了有效模拟桩基水平承载特性的有限元模型,分析了模型桩的刚度、直径、土质参数中水平土压力系数、剪胀角对桩基承载特性的影响及水平荷载下群桩承载特性,并将有限元计算结果与API规范及模型试验结果进行对比。研究结果表明,非线性有限元分析方法分析水平荷载下桩-土相互作用是可行的,计算结果可为导管架平台的桩基设计提供参考。  相似文献   

密实散粒体剪切破坏能量演化的离散元模拟     

蒋明镜  张望城  王剑锋 《岩土力学》2013,34(2):551-558

砂土等散粒体在剪切过程中的能量存储及耗散是其宏观力学响应的深层原因,但因量测难度较大而研究较少。将考虑抗转动的接触模型引入离散元软件PFC2D,基于热力学第一定律建立各种能量量测方法,并在平面应变双轴压缩试验中采用该方法统计密实散粒体在剪切过程中的能量演化规律。采取了4种耗散类型,即滑动-滚动（S-R）、滑动-非滚动（S-NR）、非滑动-滚动（NS-R）和非滑动-非滚动（NS-NR）。结果表明：密实散粒体加载时能量耗散以滑动摩擦为主;且小应变加载阶段,外力功主要转化为弹性应变能,但同时也存在均布于试样的耗散能;随着应变的增加,外力功的转化形式逐渐过渡为以耗散能为主,且集中分布在带状区域内;各个加载阶段的摩擦耗散均存在各向异性。  相似文献   

Detection of antibiotic resistant bacteria inhabiting the sand of non-recreational marine beach     

Zbigniew Mudryk 《Marine pollution bulletin》2010,60(2):207-214

The present study examined the antibiotic resistance of heterotrophic bacteria, which were isolated from the sand of the beach located in the National Park of the southern Baltic Sea coast. The bacteria demonstrated low levels of antibiotic resistance. These microorganisms were the most resistant to cefaclor and clindamycin and the most sensitive to clarithromycin, doxycycline, gentamycin and oxytetracycline. The majority of bacteria inhabiting the sand of the studied beach were resistant to only one antibiotic out of 18 tested antibiotics in this study. The bacteria inhabiting the middle part of the beach and the dune were more antibiotic resistant than bacteria isolated from the seawater and the shoreline-seawater contact zone. Generally, there was no significant difference in antibiotic resistance between bacteria isolated from the surface and the subsurface sand layers. The bacterial antibiotic resistance level depends on the chemical structure of antibiotics.  相似文献   

Mechanical and low-cycle fatigue behavior of stainless reinforcing steel for earthquake engineering applications     

George C.Lee  Jerome S.O''Connor 《地震工程与工程振动(英文版)》2010,9(3):449-457

Use of stainless reinforcing steel (SRS) in reinforced concrete (RC) structures is a promising solution to corrosion issues. However, for SRS to be used in seismic applications, several mechanical properties need to be investigated. These include specified and actual yield strengths, tensile strengths, uniform elongations and low-cycle fatigue behavior. Three types of SRSs (Talley S24100, Talley 316LN and Talley 2205) were tested and the results are reported in this paper. They were compared with the properties of A706 carbon reinforcing steel (RS), which is typical for seismic applications, and MMFX II, which is a high strength, corrosion resistant RS. Low-cycle fatigue tests of the RS coupons were conducted under strain control with constant amplitude to obtain strain life models of the steels. Test results show that the SRSs have slightly lower moduli of elasticity, higher uniform elongations before necking, and better low-cycle fatigue performance than A706 and MMFX II. All five types of RSs tested satisfy the requirements of the ACI 318 code on the lower limit of the tensile to yield strength ratio. Except Talley 2205, the other four types of RSs investigated meet the ACI 318 requirement that the actual yield strength does not exceed the specified yield strength by more than 18 ksi (124 MPa). Among the three types of SRSs tested, Talley S24100 possesses the highest uniform elongation before necking, and the best low-cycle fatigue performance.  相似文献   

Corrosion behavior of anodic oxidized TiO<Subscript>2</Subscript> film in seawater     

Min Wang  Wei Wang  Benlin He  Mingliang Sun  Yansheng Yin  Lan Liu  Wuyuan Zou  Xuefei Xu 《中国海洋大学学报(英文版)》2010,9(4):376-380

TiO₂ films were formed on metallic titanium substrates by the anodic oxidation method in H₂SO₄ solution under the 80V D.C.. Phase component and microstructure were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Water contact angles on titanium oxide film surface were measured under both dark and sunlight illumination conditions. Corrosion tests were carried out in seawater under different illumination conditions by electrochemistry impedance spectrum (EIS) and polarization curves. The result showed that the TiO₂ film prepared by the anodic oxidation method was anatase with a uniform structure and without obvious pores or cracks on its surface. The average water contact angle of the film was 116.4° in dark, in contrast to an angle of 42.7° under the UV illumination for 2 hours, which demonstrates good hydrophobic property. The anti-corrosion behavior of the TiO₂ film was declining with the extended immersion time. Under dark conditions, however, the hydrophobic TiO₂ film retarded the water infiltrating into the substrate. The impedance changed slowly and the corrosion current density was 2 orders of magnitude lower than that with the film illuminated by sunlight. All of those mentioned above indicate that the TiO₂ film possesses much better performance under dark condition, and it can be applied as an engineering material under dark seawater environment.  相似文献